Planet PoE-162S
€ 41,68 € 34,45

- 1-port High Power Splitter
- Mid Span
- Gigabit
- 12V / 24V DC output

Product: Planet PoE-162S are being added to cart ...
Product: Planet PoE-162S was added to cart.

PLANET has released a next-generation Power over Ethernet Splitter product, POE-162S, compliant with brand-new IEEE 802.3at High Power over Ethernet standard that supports a maximum of 25.5 watts of input power. The POE-162S provides the following key features:
  ■ IEEE 802.3at Power over Ethernet Standard Compliance 
  ■ 12V / 24V DC Power Output Through DIP Switch
  ■ Passive 10/100/1000Mbps Duplex Mode Support
  ■ Quick and Easy High Power PoE Network Deployment

The POE-162S is the IEEE 802.3at High Power over Ethernet Splitter that can split the 52 ~ 56V DC over the Ethernet cable into selectable 12V or 24V DC power output. It is designed specifically to meet the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome camera, color touch-screen / video and voice over IP (VoIP) telephones, multi-channel (11a / b / g / n) wireless LAN access points and other network devices that need to work normally by higher power feeding than power via current IEEE 802.3af PoE standard. The POE-162S High Power Splitter is an ideal solution to transfering power to the network device with high power demand directly via the RJ-45 port interface without the need to install power outlets and electrical cabling.

Quick and Easy High Power PoE Network Deployment
The POE-162S (Splitter) can work with the IEEE 802.3at Gigabit Power over Ethernet devices like the POE-161, High Power PoE Switch and Media Converter (Injector, insert DC voltage into Cat.5/5e/6 cable) to transfer data and power simultaneously into the end device. The POE-161, High Power Switch and Media Converter, can combine the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at Gigabit Power over Ethernet Injector. The POE-162S separates the digital data and the power into 12V / 24V DC power outputs. The maximum distance between the high power PoE injector and the splitter (POE-162S) is 100 meters. Unlike the current Power over Ethernet Splitter, the POE-162S also supports passive 10/100/1000Mbps Ethernet connection ability.

With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, to connect through the high power PoE injector and the POE-162S, you could also have benefits including cost saving, easier for networking planning and higher reliability. Upon IEEE 802.3at compliant devices are installed, the high power PoE injector working together with the POE-162S can make the connection while migrating or splitting the power and the Ethernet digital packets.

Meer informatie
Price € 34,45
Weight 1.0000
PoE Power High Power
Poe Type Splitter
Aantal Poorten 1-poort
Poe norm IEEE 802.3at

Installation of IEEE 802.3at Injector and Splitter
Due to the capability of IEEE 802.3at standard, the POE-162S can co-work with the IEEE 802.3at Gigabit PoE injector devices like POE-161, High Power Switch or High Power Media Converter and transform non-PoE equipment to IEEE 802.3at PoE application. For a place which is hard to find the power inlet, the High Power PoE devices and the POE-162S operate as a pair. It provides the easiest way to power your Ethernet devices that need high power input, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome camera, color touch-screen voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.

Hardware Specification
Interface “PoE (Power + Data)” Input Port: 1 x RJ-45 STP
“Data” Output Port: 1 x RJ-45 STP
DC Out Plug Connector: 1 
LED Indicator System: PoE In x 1 (Green)
Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328ft) 
EIA/TIA- 568 100-ohm STP (100m)
Data Rate 10/100/1000Mbps (vary on Ethernet device attached)
DIP Switch 12V DC / 24V DC output voltage
Power Input 802.3at PoE+ 52 ~ 56V DC
Power over Ethernet
PoE Standard IEEE 802.3at High Power over Ethernet
Number of client device can be powered 1
Power Output 12V DC, 2A max.
24V DC, 1A max.
DC Plug connectors (Diameter) 2 external female plug cables:
 - 5.5 / 2.5mm to 5.5 / 2.5mm
 - 5.5 / 2.5mm to 5.5 / 2mm
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at High Power over Ethernet 

Product Vragen

Stel een vraag

Stel een vraag

Sorteren op   
  • Wanneer pas ik een POE injector en wanneer een splitter toe?
    Vraag van: admin op 2017-05-04 10:07:09

    Uw PoE apparaat moet aan een IEEE802.3a norm voldoen, bijvoorbeeld de IEEE802.3af of at norm. Dit vindt u in de specificaties van uw apparaat terug. Soms gebruikt een merk haar eigen PoE norm, dan is het niet geheel zeker of wij dit kunnen voeden. Onze planet producten voldoen aan de internationaal vastgestelde normen.  U moet op een aantal zaken letten:
    - De netwerksnelheid... Lees meer

    Antwoord van: admin op 2017-05-04 12:07:09

    Antwoord toevoegen

    Antwoord toevoegen